Take Up Unit Bearings

Contact Now

Take-Up Flange Unit Bearings. Our stores Bearings Direct.Com Discover our stores. Take-Up Flange Unit Bearings There are no products in this category. Take-Up Flange with Set Screw Ball Bearing & pre-lubricated with Grease Feeding Access in Unit. Take up units with set screw lock. For applications up to 400° F (continuous), 450° F (intermittent). Specially heat treated rings. C4 Internal Clearance - To accomodate thermal expansion. Silicone Rubber Seals - Offering excellent long term heat resistance. B-Type seal configuration for wash down protection.


Take-up frames allow for the mounting of Dodge ball, roller, and sleeve bearings. We pre-engineer our frame capacity to exceed the bearing capacity for excellent performance. Our take-up frames are made to provide and maintain tension and shaft centers on a variety of belt and chain-type conveyors.


Bearing Number Bore Dia Outer DIa Width Size
NTN UCT205-100D1 Take Up Unit Bearings Single Row Non-Fill Uncoated 140 mm 65 mm
NTN UCT204 Take Up Unit Bearings Round Labyrinth 6-3/4 in 2.1875 in
NTN UCT320D1 Take Up Unit Bearings Standard 7015ctrdudmp3-nsk 18500 75mm
SKF TU 35 TF Take Up Unit Bearings 8mm Open Type 61700 10mm
AMI UCT207C Take Up Unit Bearings Dual Lip with a Gart Nitrile 5.0000 in 0.5000 in
AMI UCT213 Take Up Unit Bearings 19 mm Maximum of +225 ISO 281, ISO 6278 Uncoated
AMI UCT216 Take Up Unit Bearings 40 mm Periodic Lubrication 15 N/mm2;S Lead Free
AMI UCT217 Take Up Unit Bearings Four-Bolt Base 10.0000 in, 9.9375 i 27-3/4 in 9.5000 in
AMI UCT215-48 Take Up Unit Bearings Flange Block 0.0 N/A 29.964
AMI UCT215-47 Take Up Unit Bearings 6212zznr-nsk -- 5600 60mm
AMI UCT215 Take Up Unit Bearings 3 in 3.0000 in 2.5000 in Plain Interior
AMI UCT214 Take Up Unit Bearings 14 mm DIN 618-1/ISO 3 1530 lbf No Hole